明聖網版印刷機械有限公司

UV LAMP INSTALLATION (UV燈管安裝方式)

1. Hold the lamp with the HV cap facing the HV Terminal. Then,  turn the lamp until the Triggerwire faces the Air Blower. Push the Caps into the clips.
   握住燈管，以陶瓷末端面向HV末端，然後轉動燈管直到激發導線面向送風口，按住陶瓷末端推入燈座固定夾。
   
2. fasten the lead wire tightly to the terminal.
   鎖緊導線末端接線柱。

ATTENTION (注意事項)

1. Lamps should not be touched with bare hands.
   切勿徒手接觸燈管。
   
2. In case of dirt or accidental touching, wipe clean using a cloth with alcohol.
   萬一沾染灰塵或不慎碰觸，請以布沾酒精擦拭。